Getting smoke alarms in Toowoomba right starts with choosing the right alarms, and by 1 January 2027 every existing house, townhouse and unit in Queensland must have interconnected photoelectric smoke alarms. Super Cheap Smoke Alarms sells RED and Emerald alarms that meet the Queensland requirements and delivers them to Toowoomba by Australia Post. This page explains what the law asks for, which alarms suit your home, and whether you can fit them yourself or need an electrician.
Smoke alarms Toowoomba: interconnected photoelectric alarms delivered to your door

What the 2027 law means for smoke alarms in Toowoomba
The Queensland Government states that by 1 January 2027, all existing private homes, townhouses, units and manufactured homes in Queensland must have interconnected photoelectric smoke alarms. That includes homes in Toowoomba and the Darling Downs, whether you own and live in the home or rent it out.
Registered caravans and motorhomes are covered too. They must be fitted with a photoelectric smoke alarm, on the ceiling.
If your home still has older alarms, now is a good time to check them. Ordering early gives you time to count rooms, choose a model and, if your alarms are hardwired, book an electrician before the deadline. Our 1 January 2027 deadline explainer goes through the dates in more detail.
Which smoke alarms Toowoomba homes need
Under Queensland law, each required alarm must:
- be photoelectric (it senses smoke with a light sensor)
- not contain an ionisation sensor
- comply with Australian Standard AS 3786:2014, which is marked on the alarm
- be interconnected, so when one alarm sounds, they all sound.
The Queensland Fire Department (QFD) says to replace any alarm that contains an ionisation sensor, is not interconnected, or is more than 10 years old. Take each alarm down and look at the label: you should find the AS 3786 code and a date of manufacture.
Interconnection matters most at night. If a fire starts in a living area while everyone is asleep at the other end of the house, the alarm in each bedroom sounds at the same time, giving everyone more time to get out.
Where smoke alarms go in your home
QFD’s fact sheet lists where alarms must be installed:
- in every bedroom
- in every hallway, or room, connecting bedrooms
- on every storey of the home
- on the ceiling of registered caravans and motorhomes.
A simple way to work out how many alarms you need is to walk through the house with a notepad. Count the bedrooms, then add one for each hallway or connecting room, and check that every level has at least one. A two-storey home with bedrooms on both levels will usually need more alarms than a single-level home of the same size.
If you’re not sure about your layout, send us the number of bedrooms, hallways and storeys through the contact page and we’ll help you work out a count.
Smoke alarms Toowoomba homes can use: wireless or hardwired?
How your alarms get fitted depends on how they are powered. QFD says smoke alarms are powered by either a non-removable battery or mains power, and the rule for each is different.
Hardwired (240V) alarms connect to your home’s mains power. They must be installed by a qualified electrician. If your current alarms are hardwired, the replacements must also be hardwired.
Wireless alarms have a non-removable 10-year battery and connect to each other without wiring. QFD says you can install them yourself. For many Toowoomba homes with battery alarms now, that makes wireless interconnected alarms the simplest path to meeting the 2027 rule.
Not sure which you have? A hardwired alarm is usually attached to a base with cables running into the ceiling. If you see wires, plan on an electrician.
Choosing alarms for your Toowoomba home
We sell two brands, both photoelectric and interconnected:
- RED Smoke Alarms: the R10RF wireless interconnected alarm, the R10RFP Professional, the R240RC 240V hardwired alarm and the RWB2 wireless base. RED also makes heat alarms and carbon monoxide alarms. Browse the RED Professional range.
- Emerald Alarms: the EVO10RF wireless interconnected alarm. See the Emerald range.
Multi-packs come with a free remote controller and magnetic mounting plates, so a whole house can be ordered in one go. The remote makes monthly testing easier, especially on high ceilings. Check each product listing for exactly what is in the box.
All alarms are covered by the manufacturer’s warranty: RED alarms for 10 years from the date code on the alarm, and Emerald alarms for up to 10 years from the date code. You can compare every model in the smoke alarm shop.
For Toowoomba landlords and property managers
Rental homes must meet the same 2027 rule. The Residential Tenancies Authority (RTA) also sets out who does what during a tenancy:
- The owner or property manager tests the alarms within 30 days before a tenancy starts or is renewed, and replaces flat or nearly flat batteries.
- The tenant tests and cleans the alarms at least once every 12 months, replaces flat batteries during the tenancy, and tells the owner or manager about any problem.
- Neither side may remove an alarm or do anything that makes it less effective, such as painting or covering it.
If you manage several properties, ordering multi-packs for each one keeps the models matched, so the alarms in each home interconnect. Our landlord guide covers the rules for rentals in more detail.
Delivery to Toowoomba
We ship from our Queensland base across Australia by Australia Post:
- Standard delivery: 4 to 7 business days, $14.95
- Express delivery: 1 to 3 days, $19.95
- Free standard delivery on orders of $200 or more.
Prices include GST. You can pay by card, PayPal, Klarna or Link at checkout. Delivery times are Australia Post’s estimates, so allow a little extra if you’re working to a tenancy start date or the 1 January 2027 deadline.
Keeping your alarms working
Once your alarms are up, QFD recommends a few simple habits:
- Test every alarm once a month with the test button or remote.
- Clean away dust and insects with a vacuum or brush.
- Don’t block, cover or paint over an alarm.
Working alarms only help if everyone knows what to do when they sound. Make a home fire escape plan, practise it with everyone in the home, and keep exits clear of clutter and trip hazards.
Frequently asked questions
Do I need new smoke alarms in Toowoomba before 2027?
If your home doesn’t already have interconnected photoelectric alarms in every required place, yes. By 1 January 2027, all existing homes, townhouses and units in Queensland must have them.
Can I install smoke alarms myself?
Wireless alarms with a non-removable 10-year battery can be installed yourself, according to QFD. Hardwired alarms must be installed by a qualified electrician.
My alarms are hardwired. Can I swap to wireless?
QFD says that if your current alarms are hardwired, replacements must also be hardwired. Talk to an electrician about your options.
How do I know if my alarm is too old?
Check the date on the label. QFD says to replace alarms that are more than 10 years old.
How long does delivery to Toowoomba take?
Standard Australia Post delivery takes 4 to 7 business days and Express takes 1 to 3 days. Orders of $200 or more get free standard delivery.
Can I mix RED and Emerald alarms?
To be sure every alarm links to the others, choose one brand and range for the whole home.
Sources
- Queensland Government, Smoke alarms, page last updated 29 Oct 2026, checked 2 Nov 2026.
- Queensland Fire Department, Smoke alarm laws are changing in Queensland (fact sheet QFE00206, 05/26), checked 2 Nov 2026.
- Residential Tenancies Authority, Smoke alarm laws: what you need to know in Queensland, checked 27 Oct 2026.
- Manufacturer warranties: RED Smoke Alarms (redsmokealarms.com.au/warranty) and Emerald Alarms (emeraldalarms.com.au/warranty), checked 2 Nov 2026.
